<< Click to Display Table of Contents >> Navigation:  LAN Setup > Overview of setting the IP > [E] Disconnect PC from network..

 

This section describes how to manually set the IP on the PC.

 

Select Use the following IP address and enter a specific address (same subnet range as the VOX400)

 

 

 

 

 

For example:                IP address:                192.168.1.10

                 Subnet mask:        255.255.255.0

                 Default Gateway:        192.168.1.254

 

 

Then select Ok then Close

 

Proceed to [F] Connect the VOX400 direct to the PC