<< Click to Display Table of Contents >> Navigation:  LAN Setup > Overview of setting the IP > [D] Is the PC on DHCP?

 

This section describes how to determine if the PC is on DHCP or not.

 

1. Using the PCs search tool, type Network Connections.

 

2. Right-click on the connection type, select Properties.

 

3. Double click on Internet Protocol Version 4 (TCP/IPv4).

 

•If Obtain an IP address automatically is selected, then YES the PC is on DHCP. Proceed to [E] Disconnect PC from network...

 

 

 

•If Use the following IP address is selected, then NO the PC is not using DHCP. Proceed to [F] Connect the VOX400 direct to the PC or [J] Disconnect PC from the network...