<< Click to Display Table of Contents >> Navigation: Configuration > Option 2 - LAN Setup > LAN Device Setup |
The following section describes set the network settings in software to send LAN triggers to the VOX400.
1. Right-click a Device from the device list.
2. Tick "This is a network connected device"
TIP: Enter into the free text field a custom text to identify each VOX400 being triggered on the software.
IP Address - This is the IP address set in the VOX400, note if this has not been configured then do this first.
Port - This should be the port number the VOX400 is listening on e.g. 4196
Username - This is the communication username which is [voAdmin] as default.
Password - This is the communication password which is [voPassword] as default. Note: this is not the web interface password.
Ping device before playing - Recommended for locally attached devices, not recommended for Internet connected devices.
Select "Save" after making any changes.