<< Click to Display Table of Contents >> Navigation:  »No topics above this level« Tip - Adding to a ZIP NVR / DVR on a LAN

 

1. In the menu of the Recorder, go to Video > Video > IP Channels

 

2. Set Switch Mode to Manual. (Ignore this step if using a non-PoE NVR or DVR)

 

3. Then click Search

 

4. Tick the camera in the search, then select Add.

 

5. Enter the port as 80

Select the Protocol as Onvif_standard

Enter the username and password of the camera.

 

Select OK

 

 

 

6. The camera should appear with the IP Address in the bottom table with a green Camera symbol after a few seconds