<< Click to Display Table of Contents >> Navigation: »No topics above this level« Powering & Controls |
Powering
Option 1 - Power from 12V DC (via the 2.1mm DC Socket), the current consumption is 300mA. The IPMIT430 is polarity sensitive so connections must be made correctly.
Option 2 - Power the camera using 48V PoE, in the RJ45 WAN/POE Socket
Note: The IPMIT430 will take approximately 3 mintues to boot up.
1 = Function Button |
|
2 = LED Display |
|
3 = Setting |
|
4 = 12V DC. 2.1mm DC Socket |
|
5 = Reset/Pair Button |
|
6 = WAN - 10Mbps / 100Mbps / 1000Mbps 48 PoE network socket |
|
7 = LAN - 10Mbps / 100Mbps network socket |